fbpx
BGcurve-bottom-right-FILL-01-01

Trailing Shoe Slurry Applicator

Major Retro-Fit Farmer Spec Trailing Shoe

The MAJOR farmer specification Trailing Shoe slurry applicator sits close to the rear of the tanker for better weight distribution and is designed to fit any size tanker.

This unit is easily mounted onto the back door without welding or fabricating, and can be used with the existing splashplate in place.

 

Slurry enters the macerator through the 4” Bauer coupling and is distributed through the 40mm outlets. The macerator is fitted with an integrated foreign body separator to prevent debris from blocking the outlets.

It also contains self sharpening and self adjusting blades meaning reduced maintenance times. A large capacity stone trap is located under the macerator which collects debris. It can be cleaned out easily, without the use of tools.

The high tensile springs use the high carbon steel coulters to split the grass – allowing the slurry to run on the ground. The spring steel bars on the frame allow the outlets to follow the ground contours.

Features

  • Fully galvanised body
  • Choice of Vogelsang ExaCut or Mastek macerator. Both units distribute the slurry precisely and constantly
  • Can be used with the existing splashplate in place
  • Simple height adjustment allows the unit to be set according to tanker height making it adaptable to any tanker make or model.
  • Full lighting board is fitted as standard

Major Contractor Spec Trailing Shoe

The MAJOR MJTS6430 Slurry Applicator covers an area of 6.4m with 30 outlets. Slurry enters the Vogelsang macerator through the 4” Bauer coupling and is distributed through the 40mm outlets. A large capacity sump is located under the macerator which collects debris. It can be cleaned out easily, without the use of tools. The 40mm distribution pipes are finished off with couplings to allow simple maintenance of the rubber nozzles. The high tensile springs use the high carbon steel coulters to split the grass allowing the slurry to run on the ground. Pneumatic wheels are fitted as standard letting the frame follow the ground contours.

The ExaCut Macerator is fitted with an integrated foreign body separator to prevent debris from blocking the outlets. It also contains self sharpening and self adjusting blades meaning reduced maintenance times.

Features

  • Fully galvanised body
  • Mechanical suspension
  • Integrated spreader unit
  • Automatic mechanical shut-off
  • Vogelsang ExaCut macerator
  • Full road lighting kit

Virtual Tour

Application

Specifications

 

Model MJ81-750 MJTS6430
Details Retro-Fit Farmer Spec Contractor Spec
Working Width 7.5m (24’ 7”) 6.4m (20’ 11”)
Single/Double fold Double Single
Transport Width 2.4m (8’) 2.95m (9’ 8”)
Height 2.9m (9’ 6”)  3.42m (11’ 3”)
Wing Pivot 100° 90°
No. of Outlets 30 32
Spacing 25cm 22cm
Show/spring system Bar Spring tine
Weight 690KG *including back door  1026Kg
Macerator Vogelsang or Mastek Vogelsang ExaCut
Spools Required 2 double acting hydraulic spools 2 double acting hydraulic spools
Back Door 30″ n/a
Rearfill Yes No
Note Can be self retro fitted Factory fitted

Video

Customer Reviews And Testimonials

Need More Information?