The MAJOR Trailed Topper is a fully offset gear driven machine.
[click image to enlarge]
The MAJOR Trailed Topper is a fully offset gear driven machine. It is offset for working and folded to a neat transport width hydraulically and from the tractor seat. As the machine is fully offset there is no trampling of the pasture prior to cutting.
This topper model is available in 12', 9' & 8' cutting widths.
Product Features:
Model
8FTGD
9FTGD
12FTGDW
Working Width
2400mm
2694mm
3569mm
Weight
550 kg
650 kg
1100kg
PTO rpm
540
540
540
Blade Tip Speed Ft/min
13685
15298
13685
Blades
8
8
12
Rotors
2
2
3
Maximum Power Requirements
80 HP
80 HP
90 HP
Minimum Power Requirements
35 HP
35 HP
40 HP
Maximum Cutting Height
205mm
205mm
205mm
Minimum Cutting Height
12mm
12mm
12mm
The cutting height is set at the desired level in the farm workshop by moving the adjustable side skids to the appropriate position. There is a limit stop on the ram which controls the rear axle so, when the operator reaches the field, the machine is offset then lowered, and topping can commence. This reduces downtime in the field and adds to the safety of the machine.
The Trailed Topper is afforded further protection by the rubber buffer and the high tension spring fitted to the drawbar. This system will dampen any of the shock loads the machine will encounter in the field or in transport to and from jobs.
The Major Trailed Topper glides easily over undulating ground with the assistance of domed dishes attached to the underneath of the blades preventing scalping. These also prevent the blades from smashing on rocks or other hard objects which may lie in the path of the machine.
Trailed Topper is afforded further protection by the rubber buffer and the high tension spring fitted to the drawbar. This system will dampen any of the shock loads the machine will encounter in the field or in transport to and from jobs.