The Alpine tanker design is based on the contractor LGP specification, but with a dropped axle to give a low centre of gravity. This results in less ground pressure than standard axle tankers and minimal ground damage even in wet conditions.
There are three sizes available: 2150, 2300 and 2670 Gallons. As with all MAJOR tankers, the inside is baffled to prevent wave motions and improve operator safety.
6mm drum for increased strength
Full length heavy duty chassis independent of the tanker to ensure even transfer of the load
In addition to internal supports, there are extra supports running directly between the wheels hubs to increase strength on the stepped axle and prevent flexing
Unique industrial specification stepped axle to lower the centre of gravity for greater stability. This also reduces wear on the tyres by up to 25%.
The tanker is fully baffled to prevent wave motions for smoother and safer towing.
Primary and secondary trap to protect the pump
Rubber buffer system on the drawbar to prevent cracking and extend the life of the tanker
LED lights option available
Swivel hitch to give less wear on the hitch and hitch eye.
Battioni pumps are used on all tankers. These are a worldwide recognised quality pump with parts readily available
|OA Length (Hitch to coupling ball)||6.5m||6.8m||7.4m|
|OA Width (Tyre dependant)||2.6m||2.6m||2.7m|
|OA Height (Add tractor hitch)||3.2m||3.2m||3.2m|
|Weight (Empty)||3856 Kg||4130 Kg||4300 Kg|
|Weight (Full)||13603 Kg||14770 Kg||16500 Kg|