This is the range of agricultural slurry tankers from MAJOR. Capacities available from 1150 to 2000 gallons. See the specification tables for more details.
There is a detachable parking stand and PTO holder fitted as standard. All MAJOR tankers are constructed from 6mm steel for maximum strength. The axle is a heavy duty agricultural specification axle.
Rubber buffers are fitted as standard on the drawbar. They make the tanker easier to tow and gives a smoother journey. These tankers are supplied with a galvanised finish as standard.
Chassis rails run the length of the tanker - to strengthen and support the tank
Suspension on the drawbar as standard to reduce the stress on the tanker and allow safer towing
Heavy Duty Drawbar
Unique heavy duty drawbar design complete with parking stand - to make it easier to hitch the tanker to the tractor
PTO stand - to support the PTO when not in use and prevent damage to the PTO cover
Battioni pumps used on all tankers. These are a worldwide recognised quality pump with parts readily available
Shearbolt Protected PTO Shaft
Shearbolt protected PTO shaft to protect the pump in the event of blockages
Four Fill Point
four fill point locations (three blanked) as standard – to allow you choose the most suitable fill point for you
|Model||1150 Std||1400/1500 Std||1700 Std||2000 Std|
|OA Length (Hitch to coupling ball)||5.1m||5.9m||6.4m||6.4m|
|OA Width (Tyre dependant)||2.3m - 2.57m||2.5m||2.6m||2.6m|
|OA Height (Add tractor hitch)||2.5m - 2.9m||2.9m||2.9m||3.0m|
|15 x 22.5||YES||N/A||N/A||N/A|
|16.5 x 22.5||YES||N/A||N/A||N/A|